two_wheeler

Service Motorcycle

Complete step-by-step checklist to service motorcycle covering lubricate drive chain and change engine oil & filter, and essential action items.

Checklist Progress 0% Completed

0 of 15 Tasks Done

Lubricate drive chain

Clean and apply chain lube every 300-500 miles

Change engine oil & filter

Perform oil service per service guide limits

Verify brake fluid levels

Check front and rear fluid reservoirs are full

Inspect spark plug wear

Check, clean, or replace spark plug as scheduled

Inspect tire tread & pressure

Check tire PSI and look for cracks or wear

Check clutch cable slack

Adjust lever play to match manufacturer specs

Check sprockets tooth wear

Inspect chain teeth for sharp hook wear and replace

Inspect front fork seals

Verify fork legs show no oily leaks or residue

Inspect battery charge level

Connect battery tender if bike sits parked for weeks

Verify coolant levels status

Check radiator overflow levels on liquid-cooled bikes

Test valve clearance settings

Measure and adjust intake/exhaust engine valves limits

Verify wheel spoke tightness

Confirm wheel spokes are straight and properly tensioned

Check air filter elements

Clean reusable foam filter or replace paper elements

Lubricate pivot points hinges

Apply grease to side-stand and foot-peg hinges joints

Check exhaust pipe mounts

Confirm manifold bolts are tight to prevent engine leaks